Kilovolt meter KV4100

Kilovolt meter KV4100

КV4100 is digital measuring, fully programmable device from series 4100, designed on basis of microcontrollers. The device is used to measure middle/high voltage in electrical substations and power plants. It measures the secondary voltage of a voltage transformer with nominal secondary voltage 100VAC (or other voltage in range of 60-220VAC) and shows the primary voltage in kilovolts. KV4100 is powered by the measured voltage. The unit is designed to be mounted on boards in control rooms of electrical substations.

user manual


KV4100 is offered in following variety*:

- basic option, without any relay contacts, user menu is not code-protected
R there are three relay contacts that provide remote signalization, acting when certain programmed voltage levels are reached
C code-protected user menu
X user is not allowed to change device settings
* - Every option can be ordered in any combination with other options, excluding versions “C” and “X”.

Main technical parameters of KV4100

nominal input voltage 100 VAC
minimum input voltage value 30 VAC
maximum input voltage value 270 VAC
measuring circuit input resistance min 200kOhm
display super bright red, 4-digit, 94х29 mm visible, purple filter
measurement error < 0.5 % rgd + 2 digit
measurement cycle < 1 s
relay contacts count up to 3
power consumption < 3 W
work temperature from 0° C to 55° C
storage temperature from -50° C to +90° C
dimensions (H/W/D) 144/144/65 mm (w/o plugs); 144/144/75 mm (with plugs)
mounting hole (H/W) 136/136 mm quad, centered
protection class IP52 front, IP31 back
own weight 320 g

Normal mode of operation

User-defined parameters

  • nominal primary voltage
  • decimal point position
  • low voltage level
  • high voltage level
  • display blinking when Hi/Lo
  • hysteresis
  • delay for relay contacts switching